Environmental Consulting Environment Consultants Environmental audit Environment auditor
It's time to follow EFM - Environment Friendly Manufacturing
Environmental audit
Siddhi Consultants
Consultancy related to Health,
Safety and Environmental
regulations
Mr. Purvesh shah
Shop No. 4, Comm. Plot No.
C-3/3, Near State Bank of India, G.I.D.C., Ankleshwar – 393 002, Gujarat, India.

Mob. : 9824345895
Tel Fax : 02646-224805
Email : siddhi_ank@rediffmail.com

 

 

 

Our Spectrum of Services :
 
EFFLUENT ANALYSIS AND STACK MONITORING SERVICES :
ENVIRONMENTAL CONSULTANCY:
TESTING AND CERTIFICATION BY COMPETENT PERSON (CPS)
CERTIFICATE OF STABILITY
SERVICES IN THE FIELD OF SAFETY
EFFLUENT ANALYSIS AND STACK MONITORING SERVICES
(all major parameters viz. pH, SS, TDS, COD, BOD, DO, chlorides, sulphates, sulphides, phosphate, O&G, Ammonical Nitrogen, Heavy metals, Bioassay test etc.)
   
Stack and Ambient Air monitoring and analysis
(all major parameters viz. SPM, PM, NOx, SOx, HCl, Chlorine, Ammonia, Hydrocarbons etc.)
   
Work Area Monitoring (of major chemicals)
ENVIRONMENTAL CONSULTANCY
We are enlisted as ENVIRONMENTAL CONSULTANTS by GUJARAT POLLUTION CONTROL BOARD (copy of enlistment enclosed)
   
Treatability study of effluents (for all major types of industries) – for improvement in treatment, revamping, debottlenecking of treatment plants, cost reduction, implementation of cleaner production technologies
   
Our studies focus on minimizing capital costs as well as operating costs for treatment of effluents. We also make use of newer strategies like Prevention at source and Cleaner production technology towards reduction in effluent generation and conservation of water resources.
   
Study for maximum reuse of water in the plant alongwith calculations for savings
The study includes identifying waste water streams, which can be reused after treatment, developing schemes for segregation of this streams from main stream, proper collection and treatment facility, recycling routes etc. The study also provides an estimate of the cost of reusing water into the plant and the savings gained through reuse of water.
  Our clients have successfully obtained considerable savings through our studies for water reuse.
   
Design of ETP (new as well as for debottlenecking or expansion)- Complete Design Report with specifications and flow diagram
   
ETP operation and troubleshooting or resetup
   
Consultancy and Liasoning assistance for compliances of Environmental Act viz.
  • Consents and Authorization of State Pollution Control board under Water Act, Air Act, and Hazardous Waste (Management and Handling) Rules,
  • No Objection Certificate from State Pollution Control Board
  • Environmental Clearance from Ministry of Environment & Forests, New Delhi.
   
We provide consultation and assistance to industries for complying with various statutory requirements of the Environmental Act. It includes obtaining consents and NOC from Gujarat Pollution Control Board as well as Environmental Clearance from the Ministry of Environment & Forests (MoEF), New Delhi, starting from preparation of necessary documents and drawings to follow-up in the proceedings by attending to queries and providing all necessary information and support to the board or Ministry.
   
Environmental Impact Assessment(EIA) – Rapid & Comprehensive and Risk Assessment Studies
We carry out EIA and Risk assessment studies as per the guidelines and formats of MoEF and GPCB incorporating all necessary environmental aspects and risk scenarios using latest risk assessment softwares.
   
Infrastructure and support system for Analytical services :
We have a well-equipped analytical laboratory and all the necessary facilities for general and specific analysis of raw materials, finished products, air, water effluents and hazardous solid waste.
We follow IS and APHA standards for testing procedures, and update our methods of analysis as per new publications and amendments. At present we are capable of analyzing all major parameters in accordance with the standard methods of IS and APHA.
We have all necessary laboratory set-up viz. tiled laboratory work tables, laboratory chemicals, glassware, equipment and instruments.
Our instruments are from standard suppliers and regularly calibrated.
In addition, other facilities include exhaust system for odour prevention, personal protective equipment (gloves, gas mask, face shield etc.), sufficient area, adequate lighting, laboratory furniture, separate instrument table, sand buckets, etc.
We have a team of well-qualified chemists with ample experience and expertise in sampling and analysis.
We also provide external training to our chemists from time to time to upgrade their knowledge w.r.t to new methods of analysis.
All analytical data are recorded through computerized system.
   
Infrastructure and support system for Environmental Consultancy :
Our team comprises of qualified engineers who have gained thorough knowledge in effluent treatment, design of Effluent treatment plants, ETP operation, etc. This knowledge is coupled with the expertise of senior professionals to enable to develop methods for pollution control and prevention for various types of industries.
We have laboratory scale effluent treatment modules for carrying out treatability of effluents.
These include flocculation and coagulation tanks for primary treatment, aeration tank for secondary treatment and mini beds of activated carbon and sand filter for tertiary treatment. The sizing and hydraulics of ETP are designed based on the results obtained from this lab-scale treatment.
In addition to literature related to standards methods of analysis, we have developed a library of books on environmental chemistry, waste water engineering, pollution control, Hazardous waste management etc.
We are life members of UPL Rotary library which is only 1 km from our office, and we utilize this facility to continuously enrich our knowledge in these fields through regular reading of magazines and latest books. We have internet connection at our office computers and are members of some useful sites.
   
Parameters analysed at our laboratory :
   
 
Sr. No. Test
1 TemperatureºC
2 Colour Pt – Co Colour units
3 Odour
4 Turbidity
5 Total Solids
6 Total Dissolved Solids
7 Total Suspended Solids
8 Dissolved Oxygen
9 Biochemical Oxygen Demand
10 Chemical Oxygen Demand
11 PH Value
12 Alkalinity
13 Acidity
14 Ammonical Nitrogen
15 Nitrates
16 Phosphates
17 Sulphates
18 Chlorides
19 Residual Chlorine
20 Silica
21 Calcium
22 Magnesium
23 Hardness
24 Sodium
25 Potassium
26 Iron
27 Heavy Metals (Pb, Zn, Cr, Cu, Sb, As, Hg, Cd)
28 Oil & Grease
29 Phenolic Compounds
30 Full Boiler Water Analysis
31 Drinking Water Analysis
32 Hazardous Waste Analysis
33 Solid Waste Analysis
34 Ambient Air Analysis for SPM, SO2 & Nox per station
35 Stack Monitoring for PM, SO2 & Nox per stack
36 Coal Analysis % Ash, % Moisture, % V.M., Calorific Value
37 Hydrated Lime % Ca (OH)2
 
Instruments and other facilities at our laboratory :
 
 
Sr. No. Instrument / Equipment Make / Supplier Specifications / Capacity / Range of application Accuracy of measurement Any other detail
  Water and Wastewater Analysis
1 Digital pH Meter Elico India pH range : 0.00 to 14.00 pH ±0.01 Resolution- ±0.01
2 Weighing Balance K- Roy Single Pan
Min.weighing –0.001 g
Max. weighing – 200.000 g
±0.001g  
3 Visible Spectrophotometer (Digital) Model No. CL-310 Chemiline wavelength range – 340 to 990 nm ±2 nm
±0.005 Abs
 
4 UV-Visible spectrophotometer Systronics wavelength range – 200 to 1000 nm ±0.1 nm  
5 Digital Flame
Photometer Model
No. CL-410
Chemi Line Sodium : 2 To 100 PPM K – 1 to 100 ppm Li – 2 to 25 ppm Ca – 30 to 300 ppm ±2% &
±1 digit
 
6 Oven (Hot Air) Labline 14” x 14” x 14” (250 °C max.) ±1 deg C  
7 COD Digestor Labline FOR 15 Samples
at a time
   
8 Muffle Furnace Labline 1150 °C Max. with silica and porcelein crucibles Size : 10” x 5” x 5” ±0.3 deg C  
9 Heating Mantle Labline Cap. : 500 ML    
10 B.O.D Incubator - -    
11 Composite testing kit Aquasol Silica – 5 to 80 ppm Iron – 0 to 10 ppm Sulphate – min. 10 ppm    
12 Kjeldhal Assembly - Cap : 500 ml    
13 Distillation unit - 3 litre/hr    
14 Digital Direct TDS meter Digital Instruments Corporation TDS measurement : 0 To 200000 PPM ±1 %  
15 D.O. Meter Chemi Line DO measurement : 0 To 20 PPM ±1 % 0.1 ppm
16 Hot Water Bath Jay lab Instruments 6 Holes    
17 Gas Chromatograph Netal India Model No. Omega-QCT

----

   
 

Stack Monitoring & AAQM

18 Stack Monitoring Kit Yash Engineers, Baroda

With stack
velocity measurement,
Dry Gas Meter
and vacuum
pump, Rotameter
- 10 LPM, 100 LPM

  Temp – 0 to 500 C
19 Handy Sampler (HC sampling) Model No. AS-2 Technovation Analytical Inst. (P) Ltd., Mumbai

Rotameter 0.5 PM

   
20 High Volume Air Sampler (Carbon Brushless) Yash Engineers, Baroda

Model – HNS/HVS/21

   
21 Respirable particulate matter sampler Yash Engineers, Baroda

For PM10 measurement

   
22 Respirable dust
sampler ( for
particulate matter
less than 2.5
micron)
Yash Engineers, Baroda

for the
monitoring of
Respirable dust
and gaseous
pollutants like
SO2, NOx etc.
With inbuilt
stabiliser, timer,
time totaliser
including gaseous
assembly for
gaseous measurement, With PM 10 and PM 2.5 impactor anufactured
as per design
standardize by USEPA and
brushless motor.

   
23 Dragger Tubes and pump Uniphos Model No. – ASP-21

For Measuring
concentration of diff.solvents and chemical Range – 10 to 2000 ppm

   
 

Noise Monitoring

24 Noise Level Meter Lutron Model : SL4010

Range : 30 to
130 dB
(3 ranges)

Resolution – 0.1dB  
25 Weather monitoring station Yash Engineers, Baroda

Consists of :
1. Anemometer - measures wind speed 200 km/hr and direction 359 Deg,
2. Self-emptying Rain Gauge- measures rainfall 0 to 999 mm/hr
3. Indoor temperature 50 Deg C,
4. Humidity 2 to 98% RH
5. Barometric Pressure 795 to 1050 mb
6. Outdoor temperature and humidity 60 Deg C, 98 % RH
7. Tripod stand, RS 232 cable and software

   
 

Microbiological Analysis

26 Microscope C X L Plus

2 x 2 x 2 Feet

   
  Laminar Air
Flow
Labline ----    
  Autoclave ---- CL - 910 ,
Count 9999
   
  Digital Colony
Counter
Chemi line Cap. : 2 litres    
 

Magnetic Stirrer
With Hot Plate

 

 

Jay lab Instruments      
 
TESTING AND CERTIFICATION BY COMPETENT PERSON (CPS)
  Periodic examination and testing by Competent Person, as per Factories Act 1948, including external examination, internal examination, Hydraulic/Pneumatic test, Ultrasonic thickness measurement (NDT)
 
lifting tools and tackles (section 29)
hoists & lifts (section 28)
pressure vessels (section 31)
dangerous machinery (Centrifuge, power press etc.-Section 21)
 
CERTIFICATE OF STABILITY
  We are also associated with recognized competent person for certificate of stability, which is required to be obtained for every building/civil structure within the factory premises as per section 6 & 112 of Factories Act. Our competent person is also Govt. Registered Valuer for valuation of civil structures, buildings, etc.
 
Infrastructure and support system for Competent Person services (CPS)
We have hydraulic pumps for carrying out hydraulic tests of pressure vessels.
We also have Ultrasonic Thickness measurement machine (MS, SS range 1-100 mm thickness)
We have necessary manpower required for carrying out the tests of lifting tools & tackles, pressure vessels, hoists & lifts, etc. The tests are carried out with complete support towards plant operation, with proper scheduling. Suggestions for improvement are also given by our competent persons based on their expertise gained during their course of service.
We have authentic literature on Factories Act 1948, Gujarat Factories Act 1984 and continuously
upgrade our knowledge regarding amendments and notifications issued by Factories Inspectorate.
   
SERVICES IN THE FIELD OF SAFETY
  In today’s scenario, safety of plant and personnel is given due importance owing to statutory compliance as well as the overall benefit gained in production activities. Hence, documentation and implementation of safety are dealt with more professional approach. Technical skill along with sound knowledge of safety is required for this purpose. In our team, we have qualified safety professional who have experience and expertise in safety aspects of chemical industry and are well conversant with the various statutory requirements of Factory Act, OSHA, etc.
   
Our safety services include
Safety audit as per the guidelines of Indian standards, Factories Inspectorate
Preparation of On-site emergency plan as per the guidelines of Factory Act.
Preparation of safety manual, First Aid manual, etc.
Monthly Safety Inspection, Safety Training
HAZOP& HAZAN Study
Statutory work and documentation as per rule no. 41B, 68K, L, and P of Factory Act.
   
Infrastructure and support system for Safety services :
We have authentic literature on Factories Act 1948, Gujarat Factories Act 1984, IS guidelines and procedures for safety audits, onsite & offsite emergency plans, Hazop & Hazan studies etc.
We also make use of latest versions of softwares for HAZAN and HAZOP (such as HAZOP-Pro, PHAST) as well as Risk Assessment studies (such as ALOHA and CAMEO) which are downloaded as and when required.
We are in constant touch with industries and acknowledge ourselves with the latest developments, new safety equipments introduced, and safety issues raised from time to time. We study the incidents caused in industries and use the outcomings to improvise our safety documentation.
   
 
 
 
Home | About us | Environmental Databank | New additions | Enquiry | Contact Us © Copyright 2008, Shubh Enviro.com
Webmaster: www.smartinfosys.net